Do you know our product ranges?

Termicol completes its range of solar thermal products with an excellent quality panel that allows the passing inside of pool water without deterioration and keeping its performance at the highest level.

Pools / Solar panel

 
Termipool 1000

It enables multiple configurations to be created to suit the area in which the collection field is located.

Often, the service with existing purification pump is possible. Lacking corrosion and pool water resistant. The pool water is pumped directly through the absorbent panels. With dry run test, cast in a single piece and with an unified black color. Passable full-surface flow as well as freezing resistant.

Net Area 1.08 m2. Dimensions: Base 820mm, Length 1320mm.

  • Material: High-molecular-weight polyethylene.
  • Flow: 150 to 250 lts.m2 /h.
  • Reduced pressure loss: Approx. 0.003 bar to 200 l/h/m2.
  • Weight: Approx. 6.9 kg/m2.
  • Operating weight: Capacity: Approx. 8 l/m2.
  • Test pressure: 4.5 bars a TN.
  • Operating pressure up to: 1.2 bars at 40ºC.
  • Degree of efficiency up to: Approx. 80% (capacity up to 0.8 kWh/m2).
  • Average value: 0.65 kWh/m2.
  • Temperature resistance: - 50ºC to + 115ºC.

 

Models :

Plastic solar panel for swimming pools.
Net area: 1,08 m2.

 
 
Termipool 1001

It enables multiple configurations to be created to suit the area in which the collection field is located.

Often, the service with existing purification pump is possible. Lacking corrosion and pool water resistant. The pool water is pumped directly through the absorbent panels. With dry run test, cast in a single piece and with an unified black color. Passable full-surface flow as well as freezing resistant.

Net Area 1.05 m2. Dimensions: Base 820mm, Length 1280mm.

  • Material: High-molecular-weight polyethylene.
  • Flow: 150 to 250 lts.m2 /h.
  • Reduced pressure loss: Approx. 0.003 bar to 200 l/h/m2.
  • Weight: Approx. 6.9 kg/m2.
  • Operating weight: Capacity: Approx. 8 l/m2.
  • Test pressure: 4.5 bars a TN.
  • Operating pressure up to: 1.2 bars at 40ºC.
  • Degree of efficiency up to: Approx. 80% (capacity up to 0.8 kWh/m2).
  • Average value: 0.65 kWh/m2.
  • Temperature resistance: - 50ºC to + 115ºC.

 

Models :

Plastic solar panel for swimming pools.
Net area: 1,05 m2.

 
 
Termipool 1002

It enables multiple configurations to be created to suit the area in which the collection field is located.

Often, the service with existing purification pump is possible. Lacking corrosion and pool water resistant. The pool water is pumped directly through the absorbent panels. With dry run test, cast in a single piece and with an unified black color. Passable full-surface flow as well as freezing resistant.

Net Area 1.12 m2. Dimensions: Base 820mm, Length 1360mm.

  • Material: High-molecular-weight polyethylene.
  • Flow: 150 to 250 lts.m2 /h.
  • Reduced pressure loss: Approx. 0.003 bar to 200 l/h/m2.
  • Weight: Approx. 6.9 kg/m2.
  • Operating weight: Capacity: Approx. 8 l/m2.
  • Test pressure: 4.5 bars a TN.
  • Operating pressure up to: 1.2 bars at 40ºC.
  • Degree of efficiency up to: Approx. 80% (capacity up to 0.8 kWh/m2).
  • Average value: 0.65 kWh/m2.
  • Temperature resistance: - 50ºC to + 115ºC.

 

Models :

Plastic solar panel for swimming pools.
Net area: 1,12 m2.

 

Pools / Accessories

 
Installation accessories

Different types of accessories and connection for swimming pool solar heating systems are available.

  • Stainless steel coupling and clamps for connections ø40.
  • Stainless steel coupling and clamps for connections ø25.
  • Flat roof (0°) assembly set 0º.
  • Tiled roof assembly set.
  • Panel field and pipe connection set.
  • Pipe purging set ø40.
  • Pipe draining set ø40.
  • EPDM check valve ø40.
  • PE/EPDM ball valve ø40.
  • Swimming pool circuit connection set ø40-ø50.
  • Thermowell set for swimming pool sensor ø50.
  • Termipool Easy Control.
  • Swimming pool pump H=7m Q=5m3/h.
  • 3-way motorized valve.

Manguito y abrazaderas inoxidables para conexiones (40mm).

 

Pools / Configurations

 
with 3-way valve

Operation with a purification pump via a motorized 3-way valve with differential temperature regulation.

This type of connection can be selected as a general rule provided that the panels are not mounted more than 6 meters above the surface of the water. In the purification system’s pressure line, a motorized three-way valve is installed. The differential temperature regulation enables the valve to be changed when the operating temperature is higher than the temperature of the swimming pool water. The flow from the filter is then pumped through the panels and the heated water flows back through a T-shaped fitting to the filter circuit.

 
 
with own pump

Operation with own pump and differential temperature regulation separate from the filter circuit.

This type is used if the position of the filter is difficult to access. By means of a submerged pipe, the swimming pool water is sucked out, pumped through the panels and returned as heated water. The differential temperature regulation also ensures that the pump only functions when energy is gained. If the pump is mounted above water level and at a transportation height of over 5 m, it is necessary to install a check valve.

For the individual consumption control is required to place an energy meter in the hall of each house. There are two variants: With external exchanger to separate the heating circuit distribution or without exchanger (only advisable for small buildings)