TERMICOL HEAT PUMP MURAL: 100 and 130L
- Specially designed for small DHW demands Specially designed for small DHW demands.
- Compact design to save space in the home.
- Easy installation and access: very similar to electric heaters.
- Standard recirculation connection.
- Duplex stainless steel tank 2205 or Inox. 444
- Intelligent controller with 3 operation modes.
- Anti-legionella desinfection.
- Efficient, low-impact fan.
- Interior/exterior connection.
- Connection with photovoltaic installations.
- Allows dehumidification and cooling of spaces.
- 5-year guarantee for the tank and 2 years for the rest of
the components.
Stainless-steel tak 444
| Model | Reference | Instalation | Energy class | Sound pressure (dB) * |
|---|---|---|---|---|
| THP100M444 | 650HP100M444 | Mural | A+ | 36 |
| THP130M444 | 650HP130M444 | Mural | A+ | 36 |
* Sound pressure measured according to EN12102 and EN9614 at 5m distance and directivity
Duplex stainless-steel Tank 2205
| Model | Reference | Instalation | Energy class | Sound pressure (dB) * |
|---|---|---|---|---|
| THP100 | 650HP100 | Mural | A+ | 36 |
| THP130 | 650HP130 | Mural | A+ | 36 |
* Sound pressure measured according to EN12102 and EN9614 at 5m distance and directivity
Technical features
| Technical data | Units | THP100 | THP130 |
|---|---|---|---|
| Nominal capacity | L | 100 | 130 |
| Static pressure available | bar | 70 | 70 |
| SCOP at 7ºC* | – | 2,5 | 2,5 |
| SCOP at 14ºC* | – | 3,29 | 3,24 |
| Recovery time (14ºC/W10-55) | h | 5,68 | 6,62 |
| Thermal power range | W | 700-1200 | 700-1200 |
| Power consumption range | W | 180-300 | 180-300 |
| Maximum water temperature HP | ºC | 55 | 55 |
| Ambient Temperature range | ºC | -5 / 45 | -5 / 45 |
| Resistance power | W | 1.500 | 1.500 |
| Maximum consumption with resistance | W | 1.800 | 1.800 |
| Maximum temperature with resistance | ºC | 70 | 70 |
| Flow | m3/h | 200 | 200 |
| Connection diameter | mm | 160 | 160 |
| Electrical power supply | V/ph/Hz | 230 / 1 /50 | 230 / 1 / 50 |
| Input/output ACS | inch | 1/2 | 1/2 |
- *SCOP according to standard UNE-EN16147.
| Refrigerating circuit | Description |
|---|---|
| Compressor | Rotative |
| Refrigerant | R134a |
| Evaporator | Copper tube and aluminum fins |
| Condenser | 3000 series aluminum |
| Connections | Size |
|---|---|
| Water inlet/outlet (inch) | 1/2 |
| Air inlet / outlet (mm) | 160 |
| Condensate outlet (mm) | 1/2 |
DIMENSIONS AND SCHEME
| Measurement | THP100 | THP130 |
|---|---|---|
| A | 1075 | 1200 |
| B | 527 | 527 |
| W | 522 | 522 |
| D | 475 | 600 |
| Reference | Description |
|---|---|
| 1 | Hot water inlet |
| 2 | Cold water inlet 1/2 |
| 3 | Electric connection |
| 4 | Condensate outlet |
| 5 | Air inlet D160mm |
| 6 | Air outlet D160mm |
SWITCHBOARD
- Touch screen controller
- Prepared for connection to photovoltaic installations
- Automatic anti-legionella disinfection
- Automatic defrost when the evaporator is frozen
- Alarms
- System operation according to different sections to cover all market demands:
- In a first section: the heat pump would work up to 40ºC. At a higher temperature, the use of the heat pump would no longer be used, working only the solar thermal
- In a second section: the heat pump allows the water to be heated up to 55ºC, and the solar thermal could be acting simultaneously
- When the minimum water temperature is not reached by solar thermal, or the outside conditions are unfavorable, the logic of the system allows the aerothermal to work according to 3 operating modes:
- Eco: heat pump only operating mode
- Auto: combination of heat pump and electrical resistance when the temperature drops a lot
- Boost: heat pump and electric resistance for faster heating
HYBRIDABLE WITH PHOTOVOLTAIC
Our aerothermal equipment presents the possibility of connection to a photovoltaic installation. (These products are not included in our aerothermal kits).
- When there is excess energy production, the inverter closes the contact to send the energy to the aerothermal equipment. Our heat pump heats the water using heat pump technology, accumulating this excess energy in the form of hot water
- If there is no excess energy or not enough to power the compressor, THP heats the water using electricity from the mains.
WI-FI CONTROLLER FOR REMOTE CONTROL
Individual installations: the user can access or control the equipment remotely.
- Individual installations: the user can access or control the equipment remotely.
- Multiple installations: the installer can monitor and control all installations from a single control panel.
