TERMICOL SOLAR HYBRID: 200, 280, 500

Description

  • The Termicol Hibrid Solar System range is a very efficient solution based on the integration of two technologies, solar thermal and heat pump as support for the production of sanitary hot water
  • This new system is capable of capturing solar radiation and thermal energy from the environment, achieving a very high energy performance.
  • Termicol Solar Hybrid heats the water up to 90ºC by means of solar thermal guaranteeing up to 55ºC by means of aerothermal energy.
5anos

Features

  • Large DHW volume: available in capacities of 200, 280 and 500 liters. Guarantees minimal heat losses thanks to reinforced insulation
  • The use of solar radiation is maximized to achieve maximum savings
  • Solar coil unit incorporated in the tank together with the aerothermal. It is only necessary to link with the solar collector
  • Electrical resistance
  • Duplex stainless steel tank 2205
  • Minimum maintenance: there is no anode to replace
  • Unique controller integrating both solar and aerothermal technologies
  • Anti-legionella disinfection
  • Efficient fan with low acoustic impact
  • Alarm indicators
 

ModelCollectorLitersReferenceEnergy classSound pressure (dB) *
TSH2001S26200655HP2001S26A++40
TSH2001G26200655HP2001G26A++40
TSH2002S21200655HP2002S21A+++40
TSH2002G21200655HP2002G21A+++40
TSH2002S26200655HP2002S26A+++40
TSH2002G26200655HP2002G26A+++40
TSH2802S21260655HP2002S21A+++40
TSH2802S26260655HP2002S26A+++40
TSH2802G21260655HP2002G21A+++40
TSH2802G26260655HP2002G26A+++40
TSH5003S26500655HP2003S26A+++41
TSH5003G26500655HP2003G26A+++41
TSH5004S26500655HP2004S26A+++41
TSH5004G26500655HP2004G26A+++41

* Sound pressure measured according to EN12102 and EN9614 at 5m distance and directivity

EQUICALENT ENERGY EFFICIENCY = GENERATED THERMAL ENERGY / CONSUMED ELECTRICAL ENERGY

ModelSevilleMadrid / RomeParis / WurzburgBilbao / La Coruña
200L with 1S267,155,633,324,36
200L with 2S2111,207,473,755,24
200L with 2S2613,489,404,216,21
200L with 1G269,066,673,624,94
200L with 2G2113,309,374,256,26
200L with 2G2616,7411,644,867,62
280L with 2S218,516,373,524,82
280L with 2S2611,047,693,865,39
280L with 2G2110,697,693,525,37
280L with 2G2615,899,833,866,45
500L with 3S2610,227,043,864,94
500L with 3G2613,108,853,955,85
500L with 4S2612,938,823,905,77
500L with 4G2616,3511,054,467,06

COMPONENTS

    • Solar collectors
    • Support structures
    • Interaccumulator tank with integrated heat pump
    • Membrane expansion vessel
    • Valve and connection accessories
    • Pumping and regulation system
    • Antifreeze fluid for solar
    • Refrigerant fluid for heat pump
    • Internal coil for solar and external for heat pump
ConnectionsTSH200TSH280TSH500
Water inlet/outlet (inch)3/43/41
Air inlet / outlet (mm)160160160
Condensate outlet (mm)1/21/21/2
Solar outlet (mm)3/43/43/4
Solar inlet (mm)3/43/43/4

HEAT PUMP AND TANK

Technical featuresTSH200TSH280TSH500
Nominal capacity (L)200280500
Max pressure service (bar)666
SCOP at 7ºC *2,572,42,52
SCOP at 14ºC **2,983,042,97
Thermal power range (7ºC – 14ºC)1.464 – 1.8201.464 – 1.8203.122 – 3.917
Consumed power range (7ºC – 14ºC)500 – 545500 – 5451.082 – 1.145
Support system thermal power (W)3.3203.3205.407
Consumption max. with support (W)3.7883.7886.165
Max temp. heat pump (ºC)2.1352.1352.785
Max temp. heat pump (ºC)555555
Max temp. electrical support (ºC)656565
Power supply (V / ph / Hz)220-240 / 1 / 500220-240 / 1 / 500220-240 / 1 / 500
Resistance Power (W)1.5001.5001.500
Insulation typePolyurethane foam 42 kg / m3 Polyurethane foam 42 kg / m3 Polyurethane foam 42 kg / m3
Average insulation thickness (cm)888
Fan available pressure (Pa)707070
Equipment air flow range (m3 / h)350 – 450350 -450700
Accumulator dimensions587 x 1527 x 585587 x 1945 x 585740 x 2066 x 696
  • * SCOP cold climate zone according to standard UNE-EN16147
  • ** SCOP warm climate zone according to standard UNE-EN16147

HYBRID SYSTEM TANK

MeasureTSH200TSH280TSH500
A587587740
B152719452066
W585585696
Su95613231455
I217217245
F160160160
 

ReferenceDescription
1Electric connection
2Condensate outlet
3Hot water outlet
4Expansion Vessel
5Circulation pump
6Coil outlet socket
7Coil inlet socket
8Cold water inlet
9Air outlet
10Air inlet

 

COLLECTORS FEATURES

Technical featuresS21S26G21G26
length (mm)2047204720392039
width (mm)1047124710391239
thickness (mm)49498181
Gross Area (m2)2,152,532,142,53
Net Area (m2)2,032,442,002,41
Empty Weight (kg)293430,338,2
Fluid capacity (L)1,151,381,11,4
FrameAluminum Aluminum Aluminum Aluminum
Cover3.2 solar tempered glass3.2 solar tempered glass3.2 solar tempered glass3.2 solar tempered glass
InsulationGlass wool 15 mmGlass wool 15 mmGlass wool 40 mmGlass wool 40 mm

SWITCHBOARD

    • Touch screen controller
    • Prepared for connection to photovoltaic installations
    • Automatic anti-legionella disinfection
    • Automatic defrost when the evaporator is frozen
    • Alarms
    • System operation according to different sections to cover all market demands:
      • In a first section: the heat pump would work up to 40ºC. At a higher temperature, the use of the heat pump would no longer be used, working only the solar thermal
      • In a second section: the heat pump allows the water to be heated up to 55ºC, and the solar thermal could be acting simultaneously
    • When the minimum water temperature is not reached by solar thermal, or the outside conditions are unfavorable, the logic of the system allows the aerothermal to work according to 3 operating modes:
      • Eco: heat pump only operating mode
      • Auto: combination of heat pump and electrical resistance when the temperature drops a lot
      • Boost: heat pump and electric resistance for faster heating