TERMICOL HEAT PUMP: 200, 260L
- Maximum energy efficiency.
- Guarantees minimal heat losses thanks to its insulation
- Easy installation and access: very similar to thermoelectric.
- Up to 65ºC maximum temperature only with heat pump.
- Anti-legionella disinfection.
- Efficient fan with low acoustic impact.
- Automatic anti-legionella disinfection
- Connection and integration with other renewable energy sources such as photovoltaic or solar thermal systems.
- Self-diagnosis system.
- 5-year guarantee for the tank and 2 years for the rest of the components.
| Technical data | Units | THPT200* | THP200 | THP260* | THP200 |
|---|---|---|---|---|---|
| Nominal capacity | L | 194 | 220 | 280 – 500 | 280 – 500 |
| Maximun working pressure | bar | 8 | 8 | 2,87 | 2,87 |
| SCOP at 7ºC | – | 2,8 | 2,8 | 3,01 | 3,01 |
| SCOP at 14ºC | – | 3,1 | 3,1 | 3122 – 3907 | 3122 – 3907 |
| Potencia nominal at 7ºC | W | 1.100 | 1.100 | 1082 – 1145 | 1082 – 1145 |
| Heat pump consumption | W | 430 | 430 | 1200 | 1200 |
| Max. heat pump current | A | 9.6 | 9.6 | 55 | 55 |
| Maximum consumption with stand | W | 2.163 | 2.163 | 220 – 240 / 1 / 50 | 220 – 240 / 1 / 50 |
| Maximum water temperature with BC | ºC | 65 | 65 | 1285 | 1285 |
| Maximum water temperature with resistance | ºC | 75 | 75 | 700 | 700 |
| Power supply (frequency) | V (Hz) | 1/N/230 (50) | 1/N/230 (50) | 1/N/230 (50) | 1/N/230 (50) |
| Electric resistance power | W | 1.500 | 1.500 | 1.500 | 1.500 |
| Insulation type | – | PU | PU | PU | PU |
| Average insulation thickness | cm | 483 | 483 | 483 | 483 |
| Maximun working pressure | bar | 5 | 5 | 5 | 5 |
| Equipment airflow range | m3/h | 314 | 314 | 314 | 314 |
| Model | Reference | Instalation | Energy class | Sound pressure (dB) * |
|---|---|---|---|---|
| THPT200 | 650HPT200 | Floor | A+ | 31 |
| THPT260 | 650HPT260 | Floor | A+ | 31 |
| THPT200S* | 650HPT200S | Floor | A+ | 31 |
| THPT260S* | 650HPT200S | Floor | A+ | 31 |
* Sound pressure measured according to EN12102 and EN9614 at 5m distance and directivity
EQUIPMENT SCHEME
| Refrigerating circuit | Description |
|---|---|
| Compressor | Rotative |
| Refrigerant | R134a |
| Evaporator | Centrifugal |
| Condenser | Aluminum |
| Reference | Description | Connections |
|---|---|---|
| CW | Cold water inlet | 1″ |
| HW | Hot water outlet | 1″ |
| IS | Entrada serpentín* | 1″ |
| OS | Serpentine output * | 1″ |
| R | Recirculation | 3/4″ |
| TS | Thermostat connection | 1/2″ |
| EE | Opening for electrical resistance | 1/2″ |
| CD | Condensate drainage | 3/4″ |
Measurement
ADVANCED CONTROLLER
- Intuitive, programmable controller with LCD display
- Prepared for connection with solar thermal and photovoltaic installations.
- Automatic anti-legionella disinfection
- Automatic defrost when the evaporator is frozen
- When an error occurs or the protection mode is activated automatically,
the error number will be indicated on the control panel display and a symbol will flash
on the controller board. - Operating modes:
- Normal mode: the system logic will constantly calculate the maximum value of
the compressor operation whenever the ambient temperature exceeds 25ºC,
only activating the electrical resistance until reaching
the temperature set by the user when the compressor reaches the max.
Temperature. calculated to avoid its malfunction.
- Normal mode: the system logic will constantly calculate the maximum value of
- Fast heating mode: the electric resistance will start working at the same time as
the compressor, until it reaches the temperature set by the
user. - Electric resistance mode: only the electric resistance will act.
- Fast heating mode: the electric resistance will start working at the same time as
